DIY Dramatic Play Stand

6/20/2020

Dramatic Play is an important part of the education of young children. When children are pretending, they are developing essential social-emotional skills! They are also practicing many other important skills such as math, literacy, and physical development.

Many early childhood settings have a basic housekeeping area with a kitchen set, table, dress-up, and baby dolls. These materials are essential to early childhood classrooms and should always be available.

Setting up Dramatic Play invitations is a fun way for kids to delve deeper into a topic or theme, and offers many new ways for them to practice skills.

One basic item that can be used in multiple Dramatic Play invitations, is a simple play stand.
Unfortunately it can be difficult, and pricey, to find a basic dramatic play stand that can be transformed into any theme.

This tutorial will show you how to create a dramatic play stand that can be used to set up many different themes! This project is simple and just takes a bit of time. This tutorial will tell you all you need to know to be successful, including tips from the blunders I made while creating mine!
If I can do it, so can you!

Materials:

Before you get started, you will need to do a little shopping or scavenging for materials. You can purchase all the materials for this project or you can possibly find them all used or have them donated! Depending on how much time you allow for planning before your project, and the resources you have at hand, this project could cost anywhere from $0-60. Even if you buy everything new you are still creating something custom for your program for less than you can buy many quality dramatic play stands new.

For this tutorial, I did a mix of purchasing new materials (some on sale) and finding materials to use around the house. I spent around $30 total.

What you need:

4 rectangle, equal size, wooden crates
1 1/4" Wood Screws (you may need a different size depending on the thickness of your crates)
3 thin pieces of wood for the frame see what you may already have on hand or that may be donated by a lumber yard. I picked mine up from Home Depot for a few dollars, I talk about measurement needed in the frame building section below.
Paint, you will want something that will cover in one coat and that can be cleaned easily when the kids get something on it. I picked up a quart of paint and had plenty leftover. (Be sure to check the discount racks for OOPS paint!)
Paint brushes (you will want a large one for the surface and a smaller one for the inside edges)
Drill consider having drill bits available as well to prevent the wood from splitting (learn from my mistake!)
Sandpaper
Tape Measure
Cardboard for painting on or a drop cloth

The wooden crates can be the most expensive part of this project.
Ask around to see if anyone has any of these laying around that they would be willing to donate for the cause! You can also try to ask specialty wine stores as wine is sometimes shipped in wooden crates. If your crates are not all close to the same size you still may be able to get them to work with a little creativity.

If you are going to buy them new, and are patient, you can purchase them from a craft store one at a time using a 40% off coupon (at the time of my purchase they were $12.99 original price)

Step 1: Prepare for the project

Gather your materials, make sure everything is clean and ready to go. Before I start a project like this I like to determine where it is that I will place my items to dry, where I will work on the project, and where I will store materials if I have to stop and come back to the project. This helps me to be successful overall.
Peel any stickers off of your crates and wood and clean any residue, allow time to dry.

Step 2: Sand all the wood

You will need to sand the wood in order for the paint to stick well and to remove any rough pieces. On my crates there were a lot of rough spots that needed to be smoothed out. Don't skimp on this part! This will help painting go smoother.
In addition to your crates, make sure to sand your frame pieces.

Step 3: Time to Paint!

You can paint these in whichever order you choose, however you will need to paint in stages so you can turn it over after letting one side dry. Here are a few tips I wish I knew when I started:

I chose to do this on a very warm day so it would dry quickly, which was fantastic! However, I did not count on wind that day, be sure to check to see if it will be windy! My project ended up with some dog hair and random bits of nature in some parts.
The edges are a bit tedious to paint. After the third one I realized I was much better off painting all the inside of the slats first in order to prevent dripping and spots on my already painted slats and sides.
Have good small brushes available for the edges, I was not prepared for this and had to use a cheap one I had on-hand for crafts.

When part of one crate is done, set it in the sun and start on another. By the time you get part of each crate done, you can go back to the first and finish.

**Don't forget to paint your frame pieces!

Step 4: Assembly

Now that you have all your pieces painted and dry, it's time to assemble!
You may find your crates are not exactly the same size or made the same, I purchased 4 "identical" crates and mine were each a little different, so they didn't quite line up exact. I was a little worried about that at first, but it turned out just fine. I wanted mine so they made a pattern facing in and out (just right for customers to access items on display and clerks to store their supplies behind the register).

Line your crates up and screw them together, seems simple, right? Well it is, mostly. I do wish that I had used a drill bit to make a pilot hole. Unfortunately, my wood split a little because I did not make that pilot hole (see photo below).
But, even with that little split it's just fine, I made sure it was safe for use and I can fix it easily if I choose.

This was my big "oops" but it still turned out just fine!
I added one screw to each corner of the side of each crate.

Once all the crates are screwed together, you can add on your frame.

For my frame I picked up some thin and long wood from Home Depot and cut it right there at the store, saving me from having to break out the saw.

For the height I cut the two side boards to 60" which seems like a great height for preschoolers and allows plenty of room for signs.
For width, I measured the width of my stand, which was 36" and cut a piece to that size.

Lay the crates down as shown in the picture above, and place the frame piece on like so, then use a drill to screw the frame to the stand. Repeat for the other side. Next, attach the top piece of the frame, you will need a smaller screw for this part. I'm not sure what size I used as I just pulled one out of the toolbox.

Step 5: Time for Decor!

Shop

Ice Cream Dramatic Play Pack

$4.00

Shop

1 2

Comments